Wang Ke, Liu Yaqiong, Xu Qian, Wu Mei. Investigation on the Influencing Factors of Silicon Content in Waste Plastic Pyrolysis Oil by Inductively Coupled Plasma Emission SpectroscopyJ. 实验与分析, 2026, 4(1): 10-14. DOI: 10.20175/j.syyfx. 20260102
Citation: Wang Ke, Liu Yaqiong, Xu Qian, Wu Mei. Investigation on the Influencing Factors of Silicon Content in Waste Plastic Pyrolysis Oil by Inductively Coupled Plasma Emission SpectroscopyJ. 实验与分析, 2026, 4(1): 10-14. DOI: 10.20175/j.syyfx. 20260102

Investigation on the Influencing Factors of Silicon Content in Waste Plastic Pyrolysis Oil by Inductively Coupled Plasma Emission Spectroscopy

  • Silicon, a typical harmful impurity in waste plastic pyrolysis oil, can adversely affect subsequent deep processing. Therefore, strict control over silicon content in waste plastic pyrolysis oil is essential. Inductively Coupled Plasma Emission Spectrometry (ICP-OES), a widely used analytical technique for measuring silicon content in waste plastic pyrolysis oil, offers advantages such as convenient operation and high efficiency. However, the chemical form of silicon in samples can influence measurement results, with volatile silicon compounds potentially causing significant overestimation. Using silane and siloxane—common silicon compounds in waste plastic pyrolysis oil—as model compounds, this study investigated the recovery rates under key experimental conditions including different dilution solvents, nebulizers selection, spray chambers temperature parameters, and carrier gas flow rates. By optimizing these parameters, an accurate analytical method for determining silicon content in waste plastic pyrolysis oil was established. The optimized approach achieved relative errors below 10% for various silane and siloxane compounds, effectively improving measurement accuracy and providing scientific data support for subsequent process control.
  • loading

Catalog

    Turn off MathJax
    Article Contents

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return